Dupli-Color | SKU: BAR905

Dupli-Color Motorsport Barrel Paint - Gloss Black 312g

Name: Dupli-Color Motorsport Barrel Paint - Gloss Black 312g
Availability: InStock

$39⁹⁹

Tax included Shipping calculated at checkout.

Delivery and Shipping

Shipping is a flat rate of $11.95, *however occasionally Heavy or Bulky items, Dangerous Goods or deliveries to regional/remote areas may incur an extra freight charge. Our Customer Service team will be in contact if this does occur.
Orders to major capital cities except WA generally arrive within 3 to 5 business days, WA delivery times are normally 5 to 10 business days.
For further information please refer our Shipping & Delivery page.

365-Day Warranty

AutoMegaStore offers a 365-day warranty - 365 days from date of purchase. We will either credit, replace, or refund your item. The warranty covers all manufacturing faults and defects.
For further information please refer our Warranty page.

Item Returns

At AutoMegaStore, we want you to be 100% happy with your purchase. If, for any reason, you are not satisfied, you may return the product to us within 30 days of the date of purchase.
Email us with your name, order number, and images of the intended returned product, and our Customer
Care team will arrange authorisation for the return.
For further information please refer our Refunds & Returns page.

Dupli-Color Barrel Paint is specifically designed for high temperature and high-performance applications to restore motorcycle and ATV engines to their original factory appearance.

Covers approximately 12-14 square feet per can.
Withstands intermittent temperatures up to 550°F (288°C).
Ideal for: engine blocks, cylinder barrels & manifolds.

Dupli-Color Barrel Paint with Ceramic is formulated for high temperatures and high performance to restore motorcycles and ATV engines to their original factory appearance. Our exclusive formula increases heat dispersion to maintain and protect engine component surfaces. Withstands intermittent temperatures up to 550°F (288°C). Oil and gas resistant. Ideal for engine blocks, cylinder barrels and manifolds.

Directions:

PREP: Prepare the surface by removing loose paint, dirt, rust, grease, etc. For best results use grease and wax remover to clean surface. This can be accomplished by sand blasting or sanding the surface with 320-grit sandpaper or equivalent. Wipe surface down again with grease and wax remover. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
SHAKE: Shake can vigorously for one full minute after mixing ball moved freely. Shake for 10 seconds after each minute of use.
APPLY: For maximum adhesion and colour consistency, we recommend applying Dupli-Color Engine Enamel Primer #DE1612. To spray, hold can parallel and 8-10 inches from surface to be painted and apply in an even, sweeping motion. To avoid runs and sags, apply in 2 light coats, followed by one medium wet coat. Apply all coats within 1 hour allowing 10 minutes between each coat. For additional coats after 1 hour, wait 7 days for paint to cure. Dries to the touch in 1 hour. Can be handled in 3 hours.

Additional Information:

Formulated for high temperature and high-performance applications.
Designed to restore motorcycle and ATV engines to their original factory appearance.
Ideal for engine blocks, cylinder barrels and manifolds.
Withstands intermittent temperatures up to 550°F (288°C).
The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
After each use, invert can and spray until clear gas comes out.
If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge “ Please see our Shipping & Delivery tab for further information.