Dupli-Color Vinyl & Fabric Spray High Performance Coating 312g

Dupli-Color Vinyl & Fabric Spray High Performance Coating is specially formulated to restore and revamp faded and worn interior surfaces to a like-new finish. This versatile spray is perfect for use on automotive dashboards, door panels, center consoles, trim, and seats. Its advanced formulation ensures maximum adhesion without the need for a primer, providing a durable coating that won't crack, peel, or chip.

• Restores Like-New Finish: Ideal for revamping faded and worn surfaces in your vehicle's interior, including vinyl, fabric, and simulated leather.
• No Primer Needed: Formulated with maximum adhesion promoter, eliminating the need for a primer before application.
• Durable & Flexible: The coating provides a long-lasting finish that resists cracking, peeling, and chipping.

Application Directions:

• Prep: Remove all grease, wax, and interior detail products from the surface using a grease and wax remover. Lightly scuff the surface with a scuff pad or equivalent, then wipe down again with a grease and wax remover. Allow the surface to dry thoroughly. Mask-off surrounding areas to protect from overspray. The recommended application conditions are between 55°F (13°C) and 75°F (25°C) with humidity less than 60%.
• Shake: Shake the can vigorously for two minutes after the mixing ball moves freely, and for 10 seconds after each minute of use.
• Apply: (Optional: Apply 2 light coats of Dupli-Color Adhesion Promoter #CP199 over plastic surfaces for maximum adhesion and protection prior to the colour coat.) Hold the can 8-10 inches from the surface and use an even, sweeping motion to apply 2-3 light coats, or until the surface is evenly coated. The coating dries to the touch in 30 minutes and can be handled in 1 hour. Recoat at any time.

Additional Information:

• Carpet and Seat Application: For best results on carpet and seats, vacuum thoroughly before application. Spray the surface in one direction with long, even strokes, and brush freshly sprayed carpet with a stiff nylon brush to separate fibers. After brushing, immediately spray the surface in the opposite direction and brush again. Repeat the process until a smooth, even colour has been obtained.
• Easy Application: The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle, allowing for greater coverage with less overspray.
• Post-Use Maintenance: After each use, invert the can and spray until clear gas comes out. If the spray button becomes clogged, wear eye protection and wipe off the orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard the empty can in trash pick-up.

This high-performance coating is available in various colours allowing you to customize and restore your vehicle's interior with ease and precision.

This item is considered DG and may incur additional freight charges. Please see our Shipping & Delivery tab for further information.