Dupli-Color | SKU: WF205

Dupli-Color Wrinkle Finish Grey 312g

Name: Dupli-Color Wrinkle Finish Grey 312g
Availability: InStock

$25⁹⁹

Tax included Shipping calculated at checkout.

Delivery and Shipping

Shipping is a flat rate of $11.95, *however occasionally Heavy or Bulky items, Dangerous Goods or deliveries to regional/remote areas may incur an extra freight charge. Our Customer Service team will be in contact if this does occur.
Orders to major capital cities except WA generally arrive within 3 to 5 business days, WA delivery times are normally 5 to 10 business days.
For further information please refer our Shipping & Delivery page.

365-Day Warranty

AutoMegaStore offers a 365-day warranty - 365 days from date of purchase. We will either credit, replace, or refund your item. The warranty covers all manufacturing faults and defects.
For further information please refer our Warranty page.

Item Returns

At AutoMegaStore, we want you to be 100% happy with your purchase. If, for any reason, you are not satisfied, you may return the product to us within 30 days of the date of purchase.
Email us with your name, order number, and images of the intended returned product, and our Customer
Care team will arrange authorisation for the return.
For further information please refer our Refunds & Returns page.

Dupli-Color Wrinkle Finish Paint is specifically designed to create a distinctive custom wrinkled finish that you can both see and feel.

Covers approximately 12-14 square feet per can.
Withstands intermittent temperatures up to 350°F (177°C).
Ideal for: Engine accessory brackets, air cleaner housings, & valve covers “ exterior use only.

Dupli-Color Wrinkle Finish leaves a distinctive custom finish that you can both see and feel. This coating is extremely durable, long-lasting, and chemical resistant. Withstands intermittent temperatures up to 350°F (177°C). Ideal for engine accessory brackets, air cleaner housings and valve covers. Exterior use only.

Directions:

PREP: Prepare surface by removing loose paint, dirt, rust, grease, wax, etc. For best results use grease and wax remover to clean surface. Scuff/sand surface with a Red Scotch Brite pad or equivalent until bare metal. Wipe surface down again with grease and wax remover. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
SHAKE: Shake can vigorously for one full minute after mixing ball moves freely, Shake can for 10 seconds after each minute of use.
APPLY: To spray, hold can parallel and 8-10 inches from surface to be painted and use in ana even, sweeping motion. Apply at least 3 heavy coats in a crosshatch pattern. First coat vertically, second coat horizontally, third coat diagonally allowing 5 minutes between each coat. A relatively heavy film thickness is required for the product to wrinkle. This paint dries very slowly. A wrinkle finish does not appear immediately after spraying. Allow 2 hours to air dry. If paint fails to wrinkle or wrinkles in an uneven pattern, apply an additional coat of paint in unwrinkled areas. Although paint appears dry, avoid any contact with surface for at least 24 hours. Allow 38 hours or more before reassembling parts. To cure paint, bake in an oven for one hour at 200°F (93°C). Note that this may cause the wrinkles to be tighter.

Additional Information:

Formulates a wrinkle finish that you can see and feel.
Extremely durable, long-lasting, and chemical resistant.
Withstands intermittent temperatures up to 350°F (177°C).
Ideal for engine accessory brackets, air cleaner housings and valve covers. Exterior use only.
The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
After each use, invert can and spray until clear gas comes out.
If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
Covers approximately 12-14 square feet per can.